The high altitude test chamber can be used for the heat dissipation test sample and non-heat dissipation test sample test. For the test of heat dissipation test sample, the heat dissipation power can not exceed the cooling capacity of the refrigeration system of the test chamber, because the control of temperature and humidity is a dynamic balance process, in different temperature and humidity points, the cooling capacity of the refrigeration system is also accompanied by changes.
Product Parameters
| Temperature Chambers: | ETQ7200 |
| Climate Chambers: | ECQ7200 |
| Test Space Volume (L) | 2000 |
| Temp. Test Parameters: | |
| Temp. Range (°C) | -70~+150 |
| Temp. Constancy (°C) | ±0.1-±0.8 (Atmospheric Pressure No Load) |
| Temp. Homogeneity(°C) | ±0.5-±2.0 (Atmospheric Pressure No Load) |
| Temp. Accuracy (°C) | ±2.0 (Atmospheric Pressure No Load) |
| Heat Up Time (min) (+ 20°C to ~150°C) | 60 |
| Cooling Down Time (min) (+ 20°C to~60°C) | 80 |
| Pressure Range (Kpa) | Atmospheric Pressure ~1.0 Atmospheric Pressure ~0.5 |
| Pressure Accuracy (Kpa) | ±2 (Atmospheric Pressure ~40KPa); ±5%(40KPa~4KPa); ±0.1(4KPa~1KPa) |
| Pressure Release Time (min) | 45(Atmospheric Pressure→1KPa) |
| Rapid Release of Pressure Function (optional) | Pressure Release Range: 75.2KPa → 18.8KPa; Pressure Release Time: 15sec |
| Climate Test Parameters for ECQ series: | |
| Temp. Range (°C) | +10~+95 |
| Temp.Constancy (°C) | ±0.1~±0.8 (Atmospheric Pressure No Load) |
| Temp. Homogeneity (°C) | ±0.1~±2.0 (Atmospheric Pressure No Load) |
| Humid. Range (%RH) | (10) 20-98 (Atmospheric Pressure No Load) |
| Humid. Constancy (%RH) | ±1-±3 (Atmospheric Pressure No Load) |
| Test Space Dimension (mm) | 1400W*1200D*1200H |
| External Dimension (mm) | 1810W*3710D*2310H |
| Power | AC380V±10%, 50HZ, 3/N/PE |
| Cooling Methods | Water-Cooled |
Product Features
Integral, (high altitude test chamber door direction is in the front) for the studio, refrigeration unit for the lower, after the electric control cabinet and electric control device, the main control interface is located in front of the high altitude test chamber door, the expansion control panel is located in the right back of the high altitude test chamber. Wide open door, back and side of the studio for circulating air duct system and air conditioning system: air centrifugal fan, air diversion unit, low pressure heat radiation unit, heater, humidifier, refrigeration heat exchanger, temperature/low pressure sensing unit.
Applications
1. Electronics and Electrical Appliances Industry
Component Testing: Evaluates the performance and reliability of electronic components such as resistors, capacitors, and semiconductor devices under high and low temperature environments.
Complete Equipment Testing: Tests the operating status of complete equipment such as mobile phones, computers, and televisions in different temperature and humidity environments, ensuring their stability under extreme conditions.
2. Automotive Industry
Component Testing: Tests the durability and performance of automotive engines, electronic control systems, dashboards, and other components in high and low temperature environments.
Vehicle Testing: Simulates vehicle performance under different climatic conditions to evaluate vehicle start-up, operation, and parking performance in extreme environments.
3. Aerospace
Equipment Testing: Evaluates the reliability of aerospace equipment and materials (such as aircraft control systems and navigation equipment) in high and low temperature environments.
Materials Testing: Tests the physical properties and chemical stability of aerospace materials under different temperature conditions.
4. Pharmaceuticals and Biotechnology
Pharmaceutical Stability Testing: Evaluates the stability of pharmaceuticals in different temperature and humidity environments to determine shelf life and storage conditions.
Biopharmaceutical Testing: Tests the efficacy and safety of biological products such as vaccines and serums under different environmental conditions.
5. Materials Science
Materials Durability Testing: Evaluates the durability and aging characteristics of metals, plastics, and composite materials in high and low temperature environments.
Coating and Protective Material Testing: Tests the performance of anti-corrosion coatings, insulation materials, etc., in different environments.
6. Military and Defense
Weaponry Testing: Evaluates the performance and reliability of weapon systems and protective equipment under extreme environmental conditions.
Military Electronic Equipment Testing: Testing the operational stability of military communication equipment, navigation systems, etc., in high and low temperature environments.
7. New Energy
Solar Equipment Testing: Evaluating the efficiency and durability of solar panels and related equipment under different temperature conditions.
Energy Storage Equipment Testing: Testing the performance and safety of batteries and energy storage systems in high and low temperature environments.
8. Construction and Civil Engineering
Building Material Testing: Evaluating the performance and durability of building materials such as concrete, steel, and insulation materials under different environmental conditions.
Structural Testing: Simulating the behavior of building structures under extreme temperature conditions to ensure their stability and safety under various climatic conditions.
9. Food and Consumer Products
Food Shelf Life Testing: Evaluating the shelf life and quality changes of food and beverages under different temperature conditions.
Packaging Material Testing: Testing the performance of packaging materials in high and low temperature environments to ensure product safety during transportation and storage.
10. Academic Research
Environmental Simulation: Used in climate research, ecological environment research, and other fields to simulate different natural environmental conditions and study their impact on organisms and materials.
Basic Scientific Research: Simulating extreme environmental conditions for experiments and tests in basic scientific research such as physics and chemistry.
11. Textile and Apparel Industry
Materials Testing: Evaluating the durability and stability of textile materials in high-temperature, low-temperature, and humid environments.
Apparel Testing: Testing the comfort and performance of clothing under different temperature and humidity conditions.
12. Logistics and Transportation
Transportation Environment Simulation: Simulating extreme temperature and humidity conditions that may be encountered during transportation to evaluate the resilience and safety of products during transport.
Packaging Testing: Testing the protective performance of packaging materials and designs under different environmental conditions.
